|
Vår pris: NOK 6 795,- inkl. mva
Veil pris 7.995,- SPAR 1.200.-
The HRmk2s surpass the legendary performance of our
classic HRs to deliver even better sound quality, in a stunning new
package. The precisely engineered contours of the cast aluminum Zero
Edge Baffle™ minimize diffraction for a crystal clear image of your mix,
and control sound waves so you get detailed lows, full, articulate
mids, and shimmering highs—whether you’re on axis or off. Working in
concert with the baffle’s contours, the unique passive radiator design
delivers astonishing bass extension that’s super-tight and always
distortion-free. Wide, even dispersion of all frequencies, as well as
incredible depth of field, allow you to accurately hear your mix,
transforming your studio’s sweet spot into a full-on sweet zone. And the
high-gloss piano black wood cabinet not only looks hot, but adds just
enough warmth so your sound is true, not sterile.
Our HRmk2s were created with High Definition
audio in mind—with such unbelievable sound quality, there’s little
wonder why the HRmk2 Series was approved for THX pm3 compliance on its
initial trial. THX pm3 Certification means that the HRmk2s have met the stringent standards set by THX Ltd.for
outstanding performance, and that these monitors can be used with
confidence by anyone seeking THX Certification for their studio, or
striving to maintain THX standards.
We thought of every last detail, from
consistency in sound from one HRmk2 monitor to the next, to an aesthetic
design that unifies the whole HRmk2 family. Building on—and evolving
from—our classic HR monitors' legacy of excellence, HRmk2s deliver
superior performance and design, making them a truly pro monitoring
solution for today's studio. Les mer på Mackies nettside
Low-frequency power amplifier
Rated Power (at 1 kHz with 1% THD):
150 watts
Rated Load Impedance: 4 ohms
Burst Power Output: 350 watts
Rated THD (1W to –1 dB of rated power):
0.1 %
Slew Rate: 35V/μS
Distortion (THD, SMPTE IMD, DIM 100):
< 0.035%
Signal-to-Noise
(20Hz-20kHz, unweighted, referenced to 150W into 4!):
> 102 dB
Cooling: Convection
Design: Class AB, Parametric Servo
Feedback
High-frequency power amplifier
Rated Power(at 1 kHz with 1% THD):
100 watts
Rated Load Impedance: 6 ohms
Burst Power Output: 210 watts
Rated THD (1W to –1 dB of rated power):
0.1 %
Slew Rate: 35V/μS
Distortion (THD, SMPTE IMD, DIM 100):
< 0.035%
Signal-to-Noise
(20 Hz-20 kHz, unweighted, referenced to 100 W into 6 ohms):
> 102 dB
Cooling: Convection
Design: Conventional Class AB
Input Type: Balanced Differential
(XLR and 1/4" TRS)
Unbalanced (RCA)
Input Impedance: 20 k! Balanced
10 k! Unbalanced
Input Protection: RFI and Level Protected
Maximum Input Level: +20 dBu
Low Frequency Filter:
–3 dB @ 37 Hz, 2nd-order transitional high-pass filter
–3 dB @ 47 Hz, 4th-order Chebyshev high-pass filter
–3 dB @ 80 Hz, 4th-order Butterworth high-pass filter
HF Equalization: ±2 dB @ 10 kHz, shelving
Acoustic Space:
A position: –4 dB @ 50 Hz, shelving
B position: –2 dB @ 50 Hz, shelving
C position: Flat
Compressor:
Independent high and low frequency overload detection
Low Line Voltage Shut Down: 60% of Nominal Line
Thermal Protection: Amplifier Shut-Down, Auto Reset
Muting: 5 seconds at turn-on
Driver Protection: Independent LF and HF Detection
Overall Compression
|